Verification

Fake peptide COA: how to spot an edited, borrowed or recycled report

Spot an edited, borrowed or recycled peptide COA: lab-side lookup, lot match, chromatogram and mass checks, and what a genuine report cannot prove.

BatchVerity operations2026-11-119 min

Most bad peptide COAs are not invented from scratch. They are real laboratory reports that were edited, reused for later lots, or borrowed from another seller. A genuine lab record is still only a record of the sample that was submitted. It does not, by itself, prove that the goods you are about to pay for are the same material. For the broader scope limits, see what a COA proves, and what it does not.

This guide is for professional buyers — wholesalers, brands, and laboratories — who already have a supplier PDF and need to decide whether it can support a deposit. It is educational procurement guidance, not medical, legal, or end-use advice.

Three ways a peptide COA goes wrong

Buyers often look for a wholly fabricated document. In practice, the problems below are usually built on a real laboratory record. Each one needs a different check.

Edited reports

An edited report starts as a genuine file, then product name, labeled amount, lot number, result, client name, or date is changed. Catch this by opening the laboratory’s own copy and comparing every field, character for character — not by judging how professional the PDF looks.

Recycled reports

A recycled report is a genuine record for one tested sample that a seller keeps attaching to later orders. Typical signs are a test date that never changes across orders months apart, or a lot number that does not match the vial label, packing list, or invoice. A successful laboratory lookup only confirms that the laboratory issued that report for the sample it received.

Borrowed reports

A borrowed report belongs to another seller or client, or is presented under a laboratory name or domain that is not the issuing lab’s. A client line you do not recognise is not automatically proof of a fake file — the test may have been commissioned by a manufacturer or a group of buyers — but you should ask who submitted the sample and how it was chosen, and record the answer.

Wholly invented documents do appear, but buyers more often meet a real report applied to the wrong goods. Edited copies are usually caught by a laboratory-side lookup. Recycled and borrowed reports can survive that lookup, which is why sample identity and lot linkage have to be checked separately.

Check 1–3: Is this the document the lab actually issued?

Find the report identifiers

Look for a report or task number, a verification key, and any QR code. Without a stable identifier, you cannot retrieve the laboratory’s own record. A screenshot or photograph cannot be verified on its own: there is no original file to compare, and a code may be cropped or omitted. If identifiers are missing, ask for the complete report the laboratory issued before using the copy as evidence.

Open the record on a domain that belongs to the laboratory named on the document. Do not rely on a seller-hosted PDF, a forwarded link, or a “verify” page of uncertain ownership. As an industry observation, some look-up addresses on vendor copies do not belong to the named laboratory; confirm the domain before you enter any code.

One public example — used here only as a lookup path, not as a statement that BatchVerity uses this laboratory — is Janoshik Analytical’s verification page. That laboratory’s help centre states that a report should carry a task number and a unique key, that a missing identifier means it cannot be verified, and that a report counts as the laboratory’s record only if it matches the version stored in its system. An altered copy is not treated as legitimate. If the laboratory on your report has no public lookup, email it from a contact address on its own website and ask whether it issued the named report, and for which product, amount, lot, and date.

Compare every field, character for character

Compare product name, labeled amount, client line, lot or sample number, results, method summary, and dates with the laboratory’s copy. Any difference means the file you were sent is not the laboratory’s record. A perfect match still only shows that the laboratory issued that report for the submitted sample.

If a claimed accreditation mark appears, check it separately. ISO/IEC 17025 is the international standard for testing and calibration laboratory competence. A logo on a PDF is not a substitute for confirming, with the accreditation body, whether the laboratory is accredited for the relevant method and matrix. This article does not state that any laboratory BatchVerity works with holds a particular accreditation.

Check 4–6: Does the report describe the product you are buying?

Product name and labeled amount match the quote

The product name and labeled amount on the report should match the written quote and the goods you expect to receive. A report for a 5 mg unit does not describe a 10 mg unit of the same product name. If strength, format, or pack size differs, the report is evidence for a different item.

Client line and who commissioned the test

If the client line is not the seller you are dealing with, that is not automatically a fake report. The test may have been ordered by a manufacturer or a group of buyers. Ask who commissioned it, how the sample was chosen, and how it relates to the lot now offered, and keep the answer in the order file. If no one can explain the client line, do not use the report as evidence for this seller’s goods.

Dates that make sense

Check that the analysis or report date is consistent with any production or packing date, and with your order history. An analysis date earlier than a stated production date, or a test date that stays the same across later orders, is a reason to pause and ask for an explanation in writing. Unusual dates are a red flag, not a final verdict.

Check 7–8: Does the data support the headline number?

A purity figure needs a chromatogram and a peak table

A headline purity percentage is normally calculated from an HPLC peak table: the main peak’s area divided by the total integrated peak area. A report that shows only the percentage, with no chromatogram and no peak table, gives you nothing to check. That does not, by itself, prove the file is fabricated, but you cannot verify the number. Ask for the chromatogram and peak table before relying on the figure. See how to read the chromatogram and mass data and why a purity percentage is not a content result.

An identity claim needs an observed mass next to the expected mass

An identity line that only says “conforms” or “consistent,” with no observed or expected mass, is a conclusion without the supporting data. Ask for those values, the charge state used, and the laboratory’s stated tolerance. Rounded purity figures or missing spectra are not automatic proof of a fake document. They limit what you can verify. Request the missing data; do not declare the report false.

Check 9: Is there written lot linkage to your order?

A laboratory website lookup confirms that the laboratory issued that report for a submitted sample. It does not show that the sample came from the lot you will receive. That link needs matching identifiers across the report, labels, packing list, and invoice.

Tested Sample means the report describes the material submitted to the laboratory. Batch-Linked is used only when a documented correspondence connects that sample to a stated sales lot. Public records should be read as Tested Sample unless a specific record documents that correspondence. See Tested Sample vs Batch-Linked COA, report authenticity vs batch linkage, and How to read a peptide COA.

Before a deposit, ask the supplier to confirm in writing: the lot number that will appear on the label, carton, packing list, and invoice, and that these marks will match; that the lot on the report is the lot being quoted, or that the report is a Tested Sample record only; and how the tested sample relates to the lot you will receive. If that correspondence is not documented, keep the working label as Tested Sample. A successful lookup is not proof that your shipment matches the tested material.

What a redacted public COA can and cannot show

Public copies are often redacted so another seller cannot present the same file as evidence for unrelated goods. Redaction is not, by itself, an attempt to hide a failing result. A useful public copy should still show the product, labeled amount, date, scope, and status.

BatchVerity’s COA library follows that approach. Each public record is a Tested Sample report: a redacted copy of an authentic laboratory record for a submitted sample, with date, specification, scope, and status (for example, Current or Historical) visible. Qualified buyers can request a controlled full-version verification against a BatchVerity report ID. That process checks the report record. It does not approve or clear goods, and it does not turn a Tested Sample record into a Batch-Linked one. For a wider pattern list, see common fraud patterns in peptide supply.

A one-page COA red-flag checklist

Check What to look at Red flag What to ask next
1. Identifiers Report no., key, QR Missing, or only a screenshot Ask for the complete laboratory file
2. Lab lookup Record on the lab’s own domain Seller link, look-alike domain, or no record Open the lab’s own page, or email the lab
3. Field match Product, amount, client, lot, results, dates Any difference from the lab’s copy Do not use the supplied file as the lab record
4. Product and amount Quote, labels, and report 5 mg report used for a 10 mg quote Ask for a report that describes the item sold
5. Client line Who commissioned the test Client is not the seller, and no explanation Ask who ordered the test and how the sample was chosen
6. Dates Analysis, production, and order dates Analysis before production; date unchanged on later orders Ask for a written explanation, or a report for the current lot
7. Purity data Chromatogram and peak table Headline % only Ask for the chromatogram and peak table
8. Identity data Observed and expected mass “MS conforms” with no values Ask for masses, charge state, and stated tolerance
9. Lot linkage Report, labels, packing list, invoice Lookup succeeds but lot marks do not match Ask for matching lot marks, or a “Tested Sample only” statement

Complimentary preliminary review

Send the product, specification, quantity, destination, and the report you were given. We will tell you what the report covers, what it does not, and what to verify before a deposit. This is a reading of the document against your written requirement — not a promise that the report is authentic, and not an approval of goods.

Request a review through an RFQ, or contact us on WhatsApp at +86 180 0545 5057. For a sample from your own delivery, you can commission a laboratory yourself.

— Leo Wang, BatchVerity

FAQ

How can I tell if a peptide COA is fake?

Open the report on the issuing laboratory’s own website using its report number and verification key, then compare every field with your copy. Any difference in product, amount, lot, result, or date means the copy is not the laboratory’s record. A matching record still only covers the sample that was submitted.

Is a COA without a chromatogram fake?

Not necessarily, but it cannot be checked. A purity percentage is calculated from the HPLC peak table, so a report that shows only the number gives a buyer nothing to verify. Ask for the chromatogram and peak table before relying on the figure.

What is a recycled COA?

A recycled COA is a genuine report from one tested sample that a seller keeps attaching to later orders. Signs include a test date that never changes across orders months apart, and a lot number that does not match the vial label or packing list.

Does a lab website lookup prove my shipment is genuine?

No. A lookup confirms that the laboratory issued that report for a submitted sample. It does not show that the sample came from the lot you will receive. That link needs matching lot identifiers across the report, labels, packing list, and invoice.

Why are some public COAs redacted?

Redaction stops other sellers from presenting the same document as evidence for unrelated goods. A redacted copy should still show the product, amount, date, scope, and status, and the publisher should offer a controlled route to verify the complete record.

What should I ask a supplier after finding a red flag?

Ask for the original report identifiers, the chromatogram and mass data, the lot number the goods will carry, and a written statement of whether the report is a tested-sample record or linked to the lot being quoted.

Is the client name on a COA a red flag if it is not the seller?

Not automatically. The test may have been ordered by the manufacturer or a group of buyers. Ask who commissioned it and how the sample was chosen, and record the answer in your order file.

Sources

Pages retrieved 10 November 2026 (Asia/Shanghai). These links are provided so a reader can check the original pages. Janoshik is cited only as a public lookup example, not as a laboratory used by BatchVerity.

Scope note (retain on publish)

This article is educational procurement guidance for professional buyers. It is not medical, legal, or regulatory advice. It does not publish test results for any product and does not approve, clear, or certify goods for any human use. No dosing, therapeutic, safety, or benefit claims are intended.

Request a review